Español
Pусский
Français
العربية
Common faults of egg tray making machine and analysis of their causes
With the rapid development of the pulp packaging industry, the frequency of use of egg tray machines is also increasing. Part of the reason is caused by the non-standard use of operators, so only by strictly following the operating procedures of the egg tray machine can you effectively avoid many failures of the egg tray machine!
Analysis of common faults and causes of egg tray making machine:
There are many types of egg tray equipment, but all of them are composed of mechanical, electrical and pneumatic. The mechanical transmission mainly includes connecting rod transmission, crankshaft transmission, sheave transmission, chain transmission and gear transmission.
The mechanical track has angle iron slideway, single-arm bearing slideway, slider track, the mechanical composition is somewhat simple and clear, and it is easy to find that the fault has been repaired.
There are two types of electrical control. One is that the electrical control of the motor is relatively simple, but the electrical appliances with intermediate stop are a bit complicated. If the switch or time relay has a fault, the machine cannot complete the work without operating the machine), so the fewer the electrical appliances, the lower the fault rate.
Another electrical appliance controls the solenoid valve and the cylinder, each solenoid valve has a proximity switch control, the cylinder has a proximity switch to control the solenoid valve, and then the solenoid valve controls the cylinder, and the cylinder controls the dehydration valve, which constitutes four parts of each other. Constraints, there is a chain reaction that does not work so that the machine can not work.
In order to reduce the failure rate of the machine as much as possible, use machinery as much as possible, reduce the use of electrical appliances, and use as little pneumatic components as possible. The machine composition is as simple as possible, the simpler the better.
The large-scale application of egg tray equipment has saved a lot of labor costs for packaging companies, but in actual use, egg tray machines will inevitably have faults. A detailed analysis of the causes of equipment failures, to find out the causes of these failures and preventive measures, can ensure the actual use of the egg tray machine equipment!
