How to clean the egg tray machine after use?

2020-05-26 17:30:15

Like other mechanical equipment, egg tray machines are made by fiber forming equipment manufacturers. Regular cleaning is required for long-term use, otherwise the accumulation of dirt will reduce the service life of the egg tray machine and increase the probability of failure of the egg tray machine. Therefore, cleaning the egg tray machine is very important. So how to clean the egg tray machine?

The material of the egg tray machine is stainless steel, under normal circumstances, it will not rust. However, if it is used or maintained improperly, or the environment is too harsh, the egg tray equipment may rust. For this situation, the first thing to do is to prevent it in time. During the use process, try to avoid the equipment coming into contact with water as much as possible. If signs of rust have been found, in mild cases, wipe with a sponge or cloth dipped in alcohol, volatile oil, dina, alcohol and a mixture of toluene or acetone. Because the egg tray equipment is to shape the pulp and absorb the pulp in the pulp pool, the pulp will be stained around the egg tray equipment. These need to be cleaned in time, not just to keep the egg tray equipment clean, if too much pulp residue accumulates will wear out the machine. When cleaning the egg tray machine, do not use hard steel balls, chemical agents or steel brushes for grinding, but use a soft towel, soft cloth with water or neutral detergent, otherwise it will cause scratches or erosion.

egg tray factory

Secondly, pay attention to the order and steps of cleaning:

First of all, the pulping part of the egg tray should be cleaned, directly rinsed with water to reduce the attachment of the pulp on the egg tray machine, and then wiped with a delicate towel after rinsing with water. Damage the egg tray machine and affect the later use; secondly, it is the cleaning of the mold, the cleaning of the mold, effectively reducing the waste of pulp, thus contributing to the forming of the egg tray, and finally, the inner part of the egg tray machine. wiped.

At the same time, it should also be noted that when the egg tray machine is running in winter, it is not as smooth as in spring, summer and autumn. This situation mainly occurs because the weather turns cold, and the equipment will be slower when it starts to run, even when it starts up. The output of the first hour will be reduced, which usually happens in the northeast or even colder regions, so what kind of maintenance does such a situation need?

First of all, it is necessary to increase the temperature of the main engine workshop. When the temperature reaches a certain temperature, the operation of the equipment will be smoother; secondly, if the temperature cannot be reached, you can choose to use hot water to scald the main engine, so that the main engine and the mold will be produced when the machine stops. The ice cubes are melted; try not to stop the machine as much as possible, and it can run continuously for 24 hours without affecting the service life of the equipment. At this time, the operation of the equipment will be smoother.

Cleaning the egg tray machine is actually very simple, which is a problem that every operator should know and learn. Because the cleaning and maintenance of the egg tray machine can effectively reduce the occurrence of failures and improve the working efficiency of the egg tray machine, the egg tray machine needs to be cleaned regularly to ensure the normal use of the egg tray machine.